nazko plans images divers coloriser	FR| D| EN Bridle Connectors Structure Notes   Horizontal Axis Trailing edge Leading edge 0 = spine 0 86.5 1 0 --- 2 1.9 86.5 4 5.4 86 8 10.5 84.9 12 14.6 839.5 16 17.8 81.9 20 20.1 80.25 24 22.8 78.5 28 24.6 76.75 32 26.1 74.9 36 27.4 73      37 Standoff     40 28.3 Straight to point at 112cm 41     43 Standoff     44 29   48 29.5   52 29.9   56 30.2   60 30.5   64 30.7   68 30.8   72 30.8   76 30.7   80 30.6   84 30.3   88 29.9   92 29.5   96 28.9   100 28.4   104 27.7   108 27   112 26.2 37 116 25.3 35 120 24.5 32.9 124 23.5 30.9 128 22.6 28.8 132 21.6 26.7 136 20.7 24.5 140 = Wingtip 22.1 22.1                   Files to be downloaded: Plan     Bridle Length from rod NEW A pic for the Bridle Upper outhaul 57 cm (neutral position) Inhaul 74 cm Lower outhaul 58 cm Turbo yoke 4 cm   Fixing point for inhaul below center-T Fixing point for lower outhaul below leading edge fitting Please refer to table below for measurements.   Dimension along rods from nose     Upper leading edge fitting 35 cm Yoyo-stopper 57 cm Lower leading edge fitting 99 cm Center T 59 cm     Fixing point lower outhaul 101.5 cm Fixing point inhaul 66 cm     Rods Length Brend Leading edge 155 cm SkyShark P300 Lower spreaders 79 cm SkyShark P300 Upper spreader 59.7 cm Structil 6mm Spine 86.5 cm Structil + Skyshark Standoffs (4) 24.5 Carbon 3mm       Notes       Weight at end of spine ca. 20 g Standoff (4 pièces) 24.5 cm Stand-Off Connectors et APA 4 pieces     Trailing edge reinforced full length with Mylar-strip 2cm. Leading edge Dacron 5cm Spine extension 4 cm Skyshark or brass-rod for weight tuning.